A: RollCode is a system which connects to a machine such as slitter or roll doctoring machine, or wherever rolls needing scrap removed are processed. RollCode uses the information contained in a roll map created by our ScrapTracker system to automatically stop any of these machines at each defect flag and at the roll’s end.
A: The typical method of removing scrap requires an operator to be stationed at the slitter, rewinder or inspection machine. The operator normally has to run the machine slowly so he can watch for the next flag, stop a little early so he doesn’t miss the spot, and then jog the machine to the final location. RollCode maximizes machine run time and minimizes operator labor. Since the machine stops automatically at all flag locations and at the rolls end, no operator need be present. Also since the stopping is automatic, the machine can run at maximum process speeds between stops.
A: The ScrapTracker system applies real flags, instead of purely storing roll data. Therefore if necessary, any roll can be converted on any machine the “old fashion way.” That is, looking for the flags and stopping the machine manually.
A: Yes. The system is designed to be user installed and configured. However, engineering start-up assistance is available at prevailing rates.
A: All our products are manufactured in our plant in Bethlehem, PA USA and supported by our own in-house technical and engineering staff.
NEED MORE INFO?
We’re here to answer your questions, or help you with sales, service, or a quote. Contact us today.